Browse by Author

Journals peer-reviewed by Scopus

Ho, T.N.-T. and Nguyen, S.H. and Le, V.T. and Hoang, T.-D. (2024) Coupling design and fabrication of continuous carbon fiber-reinforced composite structures using two-material topology optimization and additive manufacturing. International Journal of Advanced Manufacturing Technology, 130 (9-10). pp. 4277-4293.

Le, V.T. and Ta, Q.T. and Pham, V.-H. (2024) Effect of current density on the morphology and electrochemical properties of nanotubular TiO2 for implant applications. Materials Research Express, 11 (6).

Khoa, T.D. and Le, V.T. and Duong, V.N. and Tran, V.C. (2024) Effects of scanning methods on cracking, microstructures and microhardness of Inconel 625 parts formed by direct laser metal deposition. Manufacturing Review, 11. ISSN 22654224

Le, V.T. and Huu, M.N. and Ha, Q.T. and Nguyen, V.A. (2024) Environmental Performance Comparison Between Wire-Arc and Powder-Laser-Based DED Processes. Lecture Notes in Mechanical Engineering. pp. 353-360. ISSN 21954356

Le, V.T. and Banh, T.L. and Ha, X.D. and Vu, T.S. and Nguyen, T.H. and Do, M.T. and Le, T.B. (2024) The Material Removal Rate of AISI H13 Tool Steel in the Roughing EDM Process with Mixing Powder: Influence Analysis and Optimization of Major Process Parameters. Lecture Notes in Mechanical Engineering. pp. 37-44.

Le, V.T. and Hoang, L. and Ghazali, M.F. and Le, V.T. and Do, M.T. and Nguyen, T.T. and Vu, T.S. (2024) Optimization and comparison of machining characteristics of SKD61 steel in powder-mixed EDM process by TOPSIS and desirability approach. International Journal of Advanced Manufacturing Technology, 130 (1-2). pp. 403-424.

Le, V.T. and Nguyen, T.D. and Hoang, T.-D. and Nguyen, V.C. (2024) Optimization of single-track deposits in wire arc-based direct energy deposition of ER110S-G steel using MONS-MFO and TOPSIS algorithms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

Doan Tat, K. and Le, V.T. and Duong Van, N. (2024) Prediction models and multi-objective optimization of the single deposited tracks in laser direct metal deposition of 316L stainless steel. Manufacturing Review, 11.

Le, V.T. and Doan, T.K. (2024) Wire Arc Additive Manufacturing: Process Overview and a Case Study on Low-Carbon Steels. CRC Press, pp. 25-39. ISBN 9781003829942; 9781032419145

Le, V.T. and Nguyen, T.-T. and Nguyen, V.C. (2024) Wire and arc-based additive manufacturing of 316L SS: predicting and optimizing process variables using BRFFNN, NSGA-GP and TOPSIS approach. Neural Computing and Applications. ISSN 09410643

Le, V.T. and Bui, M.C. and Pham, T.Q.D. and Tran, H.S. and Van Tran, X. (2023) Efficient prediction of thermal history in wire and arc additive manufacturing combining machine learning and numerical simulation. International Journal of Advanced Manufacturing Technology. ISSN 02683768

Vu, D. and Le, V.T. (2023) INVESTIGATION ON HIGH-STRENGTH LOW ALLOY 0.35Cr-1.9Ni-0.55Mo STEEL DEPOSITED ON 20Cr SUBSTRATE BY WIRE AND ARC-BASED DIRECTED ENERGY DEPOSITION. EUREKA, Physics and Engineering, 2023 (3). pp. 166-175. ISSN 24614254

Nguyen, V.C. and Le, V.T. and Pham, N.-L. and Nguyen, A.-T. (2023) MULTI-OBJECTIVE OPTIMIZATION FOR WELD TRACK GEOMETRY IN WIRE-ARC DIRECTED ENERGY DEPOSITION OF ER308L STAINLESS STEEL. Journal of Machine Engineering, 23 (2). pp. 123-134. ISSN 18957595

Vu, D. and Le, V.T. (2023) Metallurgical Characterization of SS 316L Repurposed by Wire Plus Arc Additive Manufacturing. International Journal of Engineering and Technology Innovation, 13 (3). pp. 189-202. ISSN 22235329

Le, V.T. and Bui, M.C. and Nguyen, T.D. and Nguyen, V.A. and Nguyen, V.C. (2023) On the connection of the heat input to the forming quality in wire-and-arc additive manufacturing of stainless steels. Vacuum, 209. ISSN 0042207X

Le, V.T. and Mai, D.S. and Dang, V.T. and Dinh, D.M. and Cao, T.H. and Nguyen, V.A. (2023) Optimization of Weld Parameters in Wire and Arc-Based Directed Energy Deposition of High Strength Low Alloy Steels. Advances in Technology Innovation, 8 (1). pp. 1-11.

Manh, N.H. and Le, V.T. and Le Han, D. and Nguyen, V.-A. (2023) Successful joining of ultra-thin AA3003 aluminum alloy sheets by the novel GTAW process. Vacuum, 207.

Ngo, M.H. and Le, V.T. and Gandham, B. and Nguyen, V.A. and Le, D.H. and Van, T.N. and Van, T.N. (2023) Unique characteristics of the novel-GTAW process for the butt joint of ultra-thin silicon steel sheets. Journal of Manufacturing Processes, 85. pp. 894-903.

Le, V.T. and Nguyen, H.Q. (2022) Comparison of Influence of Main Process Parameters on Surface Roughness of Heated Treatment and Non-heated Treatment SKD61 Steels Processed by PMEDM Process. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Manh, N.H. and Nguyen, V.A. and Le Duy, H. and Akihisa, M. and Le, V.T. and Ngoc, T.Q. and Gandham, B. (2022) Development of a novel GTAW process for joining ultra-thin metal sheets. Journal of Manufacturing Processes, 80. pp. 683-691. ISSN 15266125

Le, V.T. and Mai, D.S. and Bui, M.C. and Wasmer, K. and Nguyen, V.A. and Dinh, D.M. and Nguyen, V.C. and Vu, D. (2022) Influences of the process parameter and thermal cycles on the quality of 308L stainless steel walls produced by additive manufacturing utilizing an arc welding source. Welding in the World, 66 (8). pp. 1565-1580. ISSN 00432288

Pham, V.H. and Nguyen, T.D. and Le, V.T. and Tien, D.H. and Nguyen, V.-C. (2022) Optimization of Cutting Parameters in MQL Flat Surface Milling of SKD11 Steel. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Le, V.T. and Doan, Q.T. and Mai, D.S. and Bui, M.C. and Tran, H.S. and Van Tran, X. and Nguyen, V.A. (2022) Prediction and optimization of processing parameters in wire and arc-based additively manufacturing of 316L stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44 (9).

Nguyen, M.T. and Le, V.T. and Le, M.H. and Nguyen, T.A. (2022) Superplastic properties in a Ti5Al3Mo1.5 V titan alloy processed by multidirectional forging process. Materials Letters, 307: 131004. ISSN 0167577X

Bui, M.C. and Le, V.T. and Ta, D.X. and Mai, D.S. and Dinh, D.M. and Doan, T.K. and Tran, V.C. (2022) Thermal Analysis in Wire Arc Additively Manufactured SS308L Walls via Numerical Simulations. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Le, V.T. and Banh, T.L. and Do, T.L. and Nguyen, T.H. (2022) Tool Rotary Assisted EDM Processing of SKD61 Steel: Influence and Optimizing of Main Process Parameters and Surface Roughness. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Le, V.T. (2022) An investigation on machined performance and recast layer properties of AISI H13 steel by Powder Mixed-EDM in fine-finishing process. Materials Chemistry and Physics, 276: 125362. ISSN 2540584

Le, V.T. and Mai, D.S. and Tran, V.C. and Doan, T.K. (2021) Additive Manufacturing of Thin-Wall Steel Parts by Gas Metal Arc Welding Robot: The Surface Roughness, Microstructures and Mechanical Properties. In: Intelligent Systems Reference Library. Springer Science and Business Media Deutschland GmbH, pp. 43-54.

Le, V.T. (2021) Applications of life-cycle assessment method for evaluating environmental impacts of subtractive and additive manufacturing processes. In: Interdisciplinary Applications of the Life Cycle Assessment Tool. Nova Science Publishers, Inc., pp. 159-185. ISBN 9781536196900

Le, V.T. and Banh, T.L. (2021) Evaluation of the influence of electrical parameters and powder concentration to the content of tungsten on the surface of skd61 steel in edm process. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Le, V.T. (2021) Influence of Processing Parameters on Surface Properties of SKD61 Steel Processed by Powder Mixed Electrical Discharge Machining. Journal of Materials Engineering and Performance, 30 (4). pp. 3003-3023. ISSN 10599495

Le, V.T. and Mai, D.S. and Paris, H. (2021) Influences of the compressed dry air-based active cooling on external and internal qualities of wire-arc additive manufactured thin-walled SS308L components. Journal of Manufacturing Processes, 62. pp. 18-27. ISSN 15266125

Le, V.T. and Paris, H. (2021) On the use of gas-metal-arc-welding additive manufacturing for repurposing of low-carbon steel components: microstructures and mechanical properties. Welding in the World, 65 (1). pp. 157-166. ISSN 432288

Nguyen, M.T. and Nguyen, T.A. and Tran, D.H. and Le, V.T. (2021) Optimization of Superplastic Forming Process of AA7075 Alloy for the Best Wall Thickness Distribution. Advances in Technology Innovation, 6 (4). pp. 251-261. ISSN 24150436

Le, V.T. and Le, V.T. (2021) Study and evaluation the influence of rotary tool on surface roughness of skd61 steel in edm process. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020, Nha Trang.

Le, V.T. and Mai, D.S. and Doan, T.K. and Paris, H. (2021) Wire and arc additive manufacturing of 308L stainless steel components: Optimization of processing parameters and material properties. Engineering Science and Technology, an International Journal, 24 (4). pp. 1015-1026. ISSN 22150986

Le, V.T. and Le, V.T. (2021) An investigation on the impact of the interpass-cooling time on the metallurgy of wire-arc-additive-manufacturing ss308l components. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020, Nha Trang.

Le, V.T. (2021) The machined performance and recast layer properties of AISI H13 steel processed by powder mixed EDM process: an investigation and comparison in fine-finishing and semi-finishing processes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (11): 514. ISSN 16785878

Le, V.T. (2021) The role of electrical parameters in adding powder influences the surface properties of SKD61 steel in EDM process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (3): 120. ISSN 16785878

Le, V.T. and Mai, D.S. and Hoang, Q.H. (2020) Effects of cooling conditions on the shape, microstructures, and material properties of SS308L thin walls built by wire arc additive manufacturing. Materials Letters, 280: 128580. ISSN 0167577X

Ta, D.X. and Le, V.T. and Nguyen, V.C. (2020) Effects of the Die Inlet Angle and Axial Feed on Rotary Swaged Ti-6Al-4V Alloy Rods. In: Lecture Notes in Networks and Systems. Springer, pp. 290-295.

Le, V.T. and Quinsat, Y. (2020) In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system. International Journal of Advanced Manufacturing Technology, 111 (5/6/20). pp. 1767-1783. ISSN 2683768

Le, V.T. and Mai, D.S. (2020) Microstructural and mechanical characteristics of 308L stainless steel manufactured by gas metal arc welding-based additive manufacturing. Materials Letters, 271: 127791. ISSN 0167577X

Le, V.T. and Banh, T.L. and Tran, X.T. and Nguyen, T.H.M. and Le, V.T. (2020) Studying the microhardness on the surface of SKD61 in PMEDM using tungsten carbide powder. International Journal of Modern Physics B, 34 (22-24): 2040164. ISSN 2179792

Le, V.T. and Banh, T.L. and Nguyen, D.T. and Le, V.T. (2020) Wire arc additive manufacturing of thin-wall low-carbon steel parts: Microstructure and mechanical properties. International Journal of Modern Physics B, 34 (22-24): 2040154. ISSN 2179792

Le, V.T. and Mai, D.S. and Hoang, Q.H. (2020) A study on wire and arc additive manufacturing of low-carbon steel components: process stability, microstructural and mechanical properties. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (9): 480. ISSN 16785878

Le, V.T. and Paris, H. and Mandil, G. (2018) The development of a strategy for direct part reuse using additive and subtractive manufacturing technologies. Additive Manufacturing, 22. pp. 687-699. ISSN 22148604

Le, V.T. and Paris, H. (2018) A life cycle assessment-based approach for evaluating the influence of total build height and batch size on the environmental performance of electron beam melting. International Journal of Advanced Manufacturing Technology, 98 (1/4/20). pp. 275-288. ISSN 2683768

Mandil, G. and Le, V.T. and Paris, H. and Suard, M. (2016) Building new entities from existing titanium part by electron beam melting: microstructures and mechanical properties. International Journal of Advanced Manufacturing Technology, 85 (5/8/20). pp. 1835-1846. ISSN 2683768