Items where Author is "Bùi Mạnh Cường"

Trinh, H.X. and Hoang, T.K. and Bui, M.C. and Mai, X.T. (2024) Stress distribution in a multi-layer soft viscoelastic material under sliding motion of a spherical indenter tip. Mechanics of Time-Dependent Materials. ISSN 13852000

Van Cuong, N. and Van Minh, P. and Cuong, B.M. and Duc, N.D. (2024) Study on the influence of manufacturing tolerance of the spring beam on the sensitivity of the two-axis MEMS accelerometer. International Journal on Interactive Design and Manufacturing. ISSN 19552513

Le, V.T. and Bui, M.C. and Pham, T.Q.D. and Tran, H.S. and Van Tran, X. (2023) Efficient prediction of thermal history in wire and arc additive manufacturing combining machine learning and numerical simulation. International Journal of Advanced Manufacturing Technology. ISSN 02683768

Le, V.T. and Bui, M.C. and Nguyen, T.D. and Nguyen, V.A. and Nguyen, V.C. (2023) On the connection of the heat input to the forming quality in wire-and-arc additive manufacturing of stainless steels. Vacuum, 209. ISSN 0042207X

Le, V.T. and Mai, D.S. and Bui, M.C. and Wasmer, K. and Nguyen, V.A. and Dinh, D.M. and Nguyen, V.C. and Vu, D. (2022) Influences of the process parameter and thermal cycles on the quality of 308L stainless steel walls produced by additive manufacturing utilizing an arc welding source. Welding in the World, 66 (8). pp. 1565-1580. ISSN 00432288

Le, V.T. and Doan, Q.T. and Mai, D.S. and Bui, M.C. and Tran, H.S. and Van Tran, X. and Nguyen, V.A. (2022) Prediction and optimization of processing parameters in wire and arc-based additively manufacturing of 316L stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44 (9).

Bui, M.C. and Le, V.T. and Ta, D.X. and Mai, D.S. and Dinh, D.M. and Doan, T.K. and Tran, V.C. (2022) Thermal Analysis in Wire Arc Additively Manufactured SS308L Walls via Numerical Simulations. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Repetskiy, O.V. and Cuong, B.M. (2011) Fatigue life prediction of modern gas turbomachine blades. In: 21st Australasian Conference on the Mechanics of Structures and Materials, ACMSM21, 7 December 2010 through 10 December 2010, Melbourne, VIC.