Items where Source is "Journals peer-reviewed by Scopus" and Division is "Faculty of Aerospace Engineering"

A

Anh, M.N. and Tang, T.D. and Trung, V.T. and Hieu, L.C. and Tu, N.H. and Minh, H.L. and Quoc, L.H. (2020) Cost-Effective Design and Development of a Prosthetic Hand. In: 7th International Conference on the Development of Biomedical Engineering in Vietnam, BME 2018, 27 June 2018 through 29 June 2018.

B

Banh Duc, M. and Tran The, H. and Pham Van, K. and Dinh Le, A. (2023) Predicting aerodynamic performance of savonius wind turbine: An application of generalized k-ω turbulence model. Ocean Engineering, 286: 115690. ISSN 00298018

Banh Duc, M. and Tran the, H. and Dinh Duc, N. and Chu Duc, T. and Dinh Le, A. (2023) Performance enhancement of savonius wind turbine by multicurve blade shape. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 45 (1). pp. 1624-1642.

Baranava, M. and Vladislav Volcheck, D.H. and Stempitsky, V. and Ha, D.D. and Tran Tuan, T. (2020) GaN HEMT thermal characteristics evaluation using an integrated approach based on the combined use of first-principles and device simulations. In: 13th International Conference on Advanced Technologies for Communications, ATC 2020, 8 October 2020 through 10 October 2020.

C

Chiem, N.X. and Anh, N.D. and Lukianov, A.D. and Tung, P.D. and Long, H.D. and Linh, N.D. (2019) Design real-time embedded optimal PD fuzzy controller by PSO algorithm for autonomous vehicle mounted camera. In: 15th International Scientific-Technical Conference on Dynamics of Technical System, DTS 2019, 11 September 2019 through 13 September 2019.

Chu, A.M. and Nguyen, C.D. and Duong, X.B. and Nguyen, A.V. and Nguyen, T.A. and Le, C.H. and Packianather, M. (2020) A novel mathematical approach for finite element formulation of flexible robot dynamics. Mechanics Based Design of Structures and Machines. ISSN 15397734 (In Press)

Chu, H.-Q. and Nguyen, Q.-H. and Nguyen, Q.-H. and Nguyen, Q.-V. and Nguyen, V.-H. and Hoang, K.-D.T. and Le, X.-T. and Dinh, C.-T. and Tran, T.-T. (2022) Aerodynamic Performance of a Multi-stage Axial Compressor with Tip Clearance Coupled with Hub Fillet. In: AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering, RCTEMME 2021, 10 December 2021 through 12 December 2021, Hanoi.

Chu, Hoang-Quan and Dinh, Cong-Truong (2022) Aerodynamic and structural performances of a single-stage transonic axial compressor with blade fillet radius. International Journal of Intelligent Unmanned Systems. ISSN 2049-6427

D

Dam, V.P. and Vu, Q.T. and Nguyen, A.T. (2020) Effects of stiffness and the variation of center of mass on rocket motion. International Review of Aerospace Engineering, 13 (1). pp. 16-24. ISSN 19737459

Dang, H.M. and Bui, V.P. and Phung, V.B. and Gavriushin, S.S. and Nguyen, V.D. (2020) PAMMS - Procedure for automation of mathematical modeling and solution of mechanical system: Application for the design of an innovative fruit and vegetable washer. Journal of Mechanical Engineering Research and Developments, 43 (3). pp. 417-430. ISSN 10241752

Dang, H.M. and Bui, V.P. and Phung, V.B. and Thom, D.V. and Van Minh, P. and Gavriushin, S.S. and Duc, N.V. (2021) Development of a Generalized Mathematical Model for Slider-Crank Mechanism Based on Multiobjective Concurrent Engineering with Application. Arabian Journal for Science and Engineering, 46 (8). pp. 8037-8053. ISSN 2193567X

Dang, H.M. and Vo, C.T. and Nguyen, V.D. and Nguyen, H.N. and Tran, A.V. and Phung, V.B. (2021) A method for determining parameters of hyperelastic materials and its application in simulation of pneumatic soft actuator. International Journal of Computational Materials Science and Engineering: 2150017. ISSN 20476841 (In Press)

Dang, H.M. and Vo, C.T. and Trong, N.T. and Nguyen, V.D. and Phung, V.B. (2021) Design and development of the soft robotic gripper used for the food packaging system. Journal of Mechanical Engineering Research and Developments, 44 (3). pp. 334-345. ISSN 10241752

Dang, H.M. and Vo, T.K. and Ao, H.L. and Phung, V.B. and Duc, N.V. (2020) Design and development of the silkscreen printer with an innovative automatic mechanism of feeding and transporting workpieces. Journal of Mechanical Engineering Research and Developments, 44 (1). pp. 304-316. ISSN 10241752

Dhital, K. and Nguyen, A.T. and Han, J.-H. (2022) Aeroelastic modeling and analysis of wings in proximity. Aerospace Science and Technology, 130. ISSN 12709638

Dinh, H.Q. and Nguyen, A.T. and Egorov, I.V. and Duong, N.H. (2022) The Study of Mach Waves Generated by a Roughness Element. International Journal of Aeronautical and Space Sciences. ISSN 2093274X

Doan, T.N. and Hung, T.V. and Quang, D.V. (2022) Thermal Bending Analysis of FGM Cylindrical Shells Using a Quasi-3D Type Higher-Order Shear Deformation Theory. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Doan, T.N. and Van Thom, D. and Thanh, N.T. and Van Chuong, P. and Tho, N.C. and Ta, N.T. and Nguyen, H.N. (2020) Analysis of stress concentration phenomenon of cylinder laminated shells using higher-order shear deformation Quasi-3D theory. Composite Structures, 232: 111526. ISSN 2638223

Duc, D.N. and Nguyen, L. and Xuan, H.N. (2019) An Enhanced Direction based Multi-objective Evolutionary Algorithms using Rank Sum. In: 19th International Symposium on Communications and Information Technologies, ISCIT 2019, 25 September 2019 through 27 September 2019.

Dung, N.D. and Hung, T.T. (2015) Calculating dynamics of the damper system for recovering the payload in a model carrier rocket. In: 7th Asia-Pacific International Symposium on Aerospace Technology, APISAT 2015, 25 November 2015 through 27 November 2015.

Dung, N.D. and Hung, T.T. (2015) Research to identify mathematical models of quadrotor. In: 7th Asia-Pacific International Symposium on Aerospace Technology, APISAT 2015, 25 November 2015 through 27 November 2015.

Duong, V.Q. and Nguyen, L.H. and Tran, N.D. and Doan, T.L. and Tran, T.H. (2022) Bending Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Cylindrical Shell Using Higher-Order Shear Deformation Theory. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Duong, V.Q. and Tran, N.D. and Luat, D.T. and Thom, D.V. (2022) Static analysis and boundary effect of FG-CNTRC cylindrical shells with various boundary conditions using quasi-3D shear and normal deformations theory. Structures, 44. pp. 828-850. ISSN 23520124

Duong, X.B. and Chu, A.M. and Le, C.H. and Nguyen, T.A. and Vu, M.D. and Le, A. (2021) Comparison of the efficiency of numerical algorithms for solving the inverse kinematics problem of redundant serial-link robots. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

F

Firsanov, V.V. and Doan, T.N. (2015) Investigation of the statics and free vibrations of cylindrical shells on the basis of a nonclassical theory. Composites: Mechanics, Computations, Applications, 6 (2). pp. 135-166. ISSN 21522057

G

Giap, V.T.T. (2019) The geometrical non-linearity influence of the suspension of micromechanical gyroscope under the conditions of angular vibration. International Journal of Mechanical Engineering and Robotics Research, 8 (5). pp. 691-695. ISSN 22780149

Giap, Vu The Trung (2021) Dynamics of the Micromechanical Gyroscope with the Elastic Disk Resonator. pp. 971-976. ISSN 2211-0984

H

Han, J.-S. and Nguyen, A.T. and Han, J.-H. (2019) Aerodynamic characteristics of flapping wings under steady lateral inflow. Journal of Fluid Mechanics, 870. pp. 735-759. ISSN 221120

Hung Tran, T. and Hijikuro, M. and Anyoji, M. and Uchida, T. and Nakashima, T. and Shimizu, K. (2023) Surface flow and aerodynamic drag of Ahmed body with deflectors. Experimental Thermal and Fluid Science, 145. ISSN 08941777

K

Kuznetsova, E.L. and Tarlakovski, D.V. and Hoa, N.N. and Starovoytov, E.I. (2016) Surface transient functions for elastic half space. Applied Mathematical Sciences, 10 (21-24). pp. 1057-1067. ISSN 1312885X

L

Lapshin, V.P. and Hristoforova, V.V. and Zakaluyzhnyy, A.A. and Klueva, A.R. and Tung, P.D. (2019) Improving the efficiency of the heat and power system, due to the synthesis of control based on the synergistic concept. In: 2019 International Conference "Energy Efficiency and Energy Saving in Technical Systems", EEESTS 2019, 19 April 2019 through 20 April 2019.

Le, A.D. and Tran, H.T. (2022) Improvement of Mass Transfer Rate Modeling for Prediction of Cavitating Flow. Journal of Applied Fluid Mechanics, 15 (2). ISSN 17353572

Le, C.H. and Kasmaji, W.W. and Packianather, M.S. and Mengistu, S. and Tran, D.T. and Chu, A.M. (2017) Customer driven mass-customisation and innovative product development with parametric design & generative modeling. In: 15th International Conference on Manufacturing Research, ICMR 2017, 5 September 2017 through 7 September 2017.

Le, C.H. and Pham, B.M. and Tran, D.T. and Lam, K. and Le, T.H. and Vo, D.L. and Mengistu, S. and Packianather, M.S. (2018) An integrated system and framework for development of medical applications and products based on medical imaging data. In: 6th International Conference on the Development of Biomedical Engineering in Vietnam, BME 2016, 27 June 2016 through 29 June 2016.

Le, Dinh-Son and Phan, Hai-Hong and Hung, Ha Huy and Tran, Van-An and Nguyen, The-Hung and Nguyen, Dinh-Quan (2022) KFSENet: A Key Frame-Based Skeleton Feature Estimation and Action Recognition Network for Improved Robot Vision with Face and Emotion Recognition. Applied Sciences, 12 (11). p. 5455. ISSN 2076-3417

Le, M.-T. and Nguyen, T.-D. and Tran, X.-N. and Ngo, V.-D. (2018) On the Combination of Double Space Time Transmit Diversity with Spatial Modulation. IEEE Transactions on Wireless Communications, 17 (1): 8077762. pp. 170-181. ISSN 15361276

Le, V.D.T. and Nguyen, A.T. and Dang, N.T. and Phung, B.V. (2022) A Multibody Dynamics Approach to Study an Insect-Wing Structure. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Le, V.D.T. and Nguyen, A.T. and Nguyen, L.H. and Dang, N.T. and Tran, N.D. and Han, J.-H. (2021) Effectiveness Analysis of Spin Motion in Reducing Dispersion of Sounding Rocket Flight due to Thrust Misalignment. International Journal of Aeronautical and Space Sciences, 22 (5). pp. 1194-1208. ISSN 2093274X

Le, V.D.T. and Nguyen, A.T. and Phung, V.B. and Pham, T.D. and Han, J.-H. (2020) The beam modelling of the hawkmoth wing structure. In: Bioinspiration, Biomimetics, and Bioreplication X 2020, 27 April 2020 through 8 May 2020.

Lee, J.-W. and Nguyen, A.T. and Han, J.-H. (2018) Longitudinal flight control of bioinspired flapping-wing micro air vehicle with extended unsteady vortex-lattice method. In: 31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018, 9 September 2018 through 14 September 2018.

Lee, J.-W. and Nguyen, A.T. and Han, J.-H. (2018) Transition flight control simulations of bioinspired FWMAV with extended unsteady vortex-lattice method. In: Bioinspiration, Biomimetics, and Bioreplication VIII 2018, 5 March 2018 through 7 March 2018.

Luong, V.-T. and Le, M.-T. and Nguyen, D. and Tran, X.-N. and Ngo, V.-D. (2016) New upper bound for high-rate spatial modulation systems using QAM modulation. In: 8th International Conference on Advanced Technologies for Communications, ATC 2015, 14 October 2015 through 16 October 2015.

Lyapin, Alexandr and Murgul, Vera and Beskopylny, A.N. and Porksheyan, V.M. and Komakhidze, M.G. and Sukhinov, A.I. and Chetverushkin, B.N. and Avetisyan, A.I. and Kalyaev, I.A. and Tishkin, V.F. and Shananin, A.A. and Yakobovskiy, M.V. and Pasetti, M. and Pitel, J. and Dvornikov, O.V. and Melikyan, V.Sh. and Nawabi, Z. and Zoryan, Ye. and Ubar, R. and Dolgov, V.V. and Korochentsev, D.A. and Pavlov, I.V. and Sobol, B.V. and Pozharsky, D.A. and Lukyanov, A.D. and Lukyanov, E.A. and Chistyakov, A.E. and Studennikova, S.G. and Krivoruchko, A.V. and Misyura, V.V. and Revyakina, E.A. and Ventsov, N.N. and Belova, Yu.V. and Lyakhnitskaya, O.V. and Tipaeva, E.R. and Vereskun, V. and Benin, A. and Ilyin, I.V. and Kolesnikov, V. and Potjanajaruwit, P. and Chelokhyan, A. and Surinskiy, D. and Kalinina, O. and Guda, A. and Vatin, N. and Artiukh, V. and Gravit, M. and Edigarian, A. and Kaplyuk, M. and Kravchenko, M. and Shepilova, E. and Ovcharenko, S. and Galiev, I. and Meskhi, B. and Polushkin, O. and Shvedova, S. and Lebedenko, V. and Mozgovoy, A. and Tamarkin, M. and Zakovorotny, V. and Varavka, V. and Marchuk, V. and Minkin, M. and Aizikovich, S. and Bereza, A. and Bordachev, E. and Brzhozovsky, B. and Burlakova, V. and Veselov, G. and Kolesnikov, A. and Kostoglotov, A. and Lebedev, V. and King, Gillespie Larks and Anh, Nguyen Dong and Prokopenko, N. and Soloviev, A. and Sevostyanov, I. and Tung, Pham Dinh and Khakhanov, V. and Nasser, Kekhtarnavas and Egiazarian, K. and Karapetyan, G. and Mladenovic, V. and Petkovic, M. and Najafabadi, Tooraj Abbasian and Khaled, Hamouda and Chungguan, Liu and Popovic, Z. and Manakov, A. and Kudriavtcev, S. and Bieliatynskyi, A. and Jovanovski, M. and Ognjenovic, S. and Vukićević, M. and Vlasevskii, S. and Borodinecs, A. and Garifullin, M. and Dimitrov, V. and Appathurai, Ahilan and Saračević, Muzafer H. and Hasan, Ali M. and Tezer, Murat and Jalab, Hamid A. and Liao, Huchang and Basmaci, Gultekin and Uyumaz, Ahmet and Witalis, Kozubal Janusz and Anysz, Hubert and Ageev, E. and Akhverdiev, K. and Andreev, V. and Antipas, Imad R. and Bertram, Torsten and Bezuglov, D. and Cherkesova, L. and Chukarin, A. and Eliseev, S. and Eremeev, V. and Flek, M. and Galushkin, N. and Gillespie, LaRoux K. and Kureychik, V. and Kuznetzov, G. and Miroshnichenko, I. and Mukutadze, Murman A. and Mokrozub, V. and Ogar, P. and Ougolnitsky, G. and Popov, V. and Sidorov, V. and Solovyev, A. and Verner, I. and Yazyev, B. (2021) Preface. In: Intelligent Information Technology and Mathematical Modeling 2021, IITMM 2021, 31 May 2021through 6 June 2021, Divnomorskoe.

M

Minh, D.H. and VAN BINH, P. and Duc, N.V. (2018) Multi-objective design for a new type of frame saw machine. International Journal of Mechanical and Production Engineering Research and Development, 9 (2): IJMPERDAPR. pp. 449-466. ISSN 22496890

Minh, D.H. and Van Binh, P. and Van Phuong, B. and Vn, D. (2019) Multi-criteria design of mechanical system by using visual interactive analysis tool. Journal of Engineering Science and Technology, 14 (3). pp. 1187-1199. ISSN 18234690

Minh Do, V. and Hung Tran, T. and Son Bui, X. and Anh Le, D. (2022) Influence of Spike-Nosed Length on Aerodynamic Drag of a Wing-Projectile Model. Advances in Military Technology, 17 (1). pp. 33-45. ISSN 18022308

My, C.A. and Bien, D.X. and Tung, B.H. and Hieu, L.C. and Cong, N.V. and Hieu, T.V. (2019) Inverse kinematic control algorithm for a welding robot-positioner system to trace a 3D complex curve. In: 12th International Conference on Advanced Technologies for Communications, ATC 2019, 17 October 2019 through 19 October 2019.

My, C.A. and Cong, N.V. and Hong, N.M. and Bohez, E.L.J. (2020) Transformation of CAM data for 5-axis cnc machine spinner u5-620. International Journal of Mechanical Engineering and Robotics Research, 9 (2). pp. 233-237. ISSN 22780149

My, C.A. and Le, C.H. and Duong, X.B. and Bohez, E.L.J. and Vu, M.D. and Nguyen, T.A. and Nguyen, V.C. and Parkianather, M. (2021) A generalization approach for the kinematic modelling of the rotational axes of five-axis cnc centers. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

My, C.A. and Le, C.H. and Duong, X.B. and Bohez, E.L.J. and Vu, M.D. and Nguyen, T.A. and Nguyen, V.C. and Parkianather, M. and Hoang, C.D. (2021) Real time inverse kinematics of five-axis cnc centers. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

My, C.A. and Makhanov, S.S. and Van, N.A. and Duc, V.M. (2020) Modeling and computation of real-time applied torques and non-holonomic constraint forces/moment, and optimal design of wheels for an autonomous security robot tracking a moving target. Mathematics and Computers in Simulation, 170. pp. 300-315. ISSN 3784754

My, Chu Anh and Dinh, Nguyen Cong and Hung, Truong Quoc and Hung, Pham Hoang and Nguyen, Nguyen The and Van Luu, Dao and Bien, Duong Xuan and Duc, Vu Minh and Le, Chi H. (2021) General Approach for Parameterization of the Inverse Dynamic Equation for Industrial Robot and 5-axis CNC Machine. In: 6th IFToMM Asian Mechanisms and Machine Science Conference, Asian MMS 2021, 15 December 2021through 18 December 2021, Virtual, Online.

N

Nam, N.N. and Lee, S.-D. and You, S.-S. and Tung, P.D. (2020) Dynamical analysis for the motorised spindles of machine tools. International Journal of Machining and Machinability of Materials, 22 (3/4/20). pp. 248-263. ISSN 17485711

Nam, N.N. and You, S.-S. and Hung, B.M. and Tung, P.D. and Kim, H.-S. (2019) Robust control synthesis for CNC machine spindle. Machining Science and Technology, 23 (6). pp. 985-1002. ISSN 10910344

Nam, T.Q. and Tien, H.V. and Van, N.A. and Dinh Quan, N. (2023) Development of an Autonomous Mobile Robot System for Hospital Logistics in Quarantine Zones. In: International Conference on Intelligent Systems and Network, ICISN 2023, 18 March 2023 Through 19 March 2023, Hanoi.

Nga, N.T.T. and Minh, D.H. and Hanh, N.T.M. and Binh, P.V. and Phuong, B.V. and Viet, D.N. (2020) Dynamic analysis and multi-objective optimization of slider-crank mechanism for an innovative fruit and vegetable washer. Journal of Mechanical Engineering Research and Developments, 43 (2). pp. 127-143. ISSN 10241752

Ngoc, T.T. and Xuan, N.T. and The, C.D. (2010) Combined iterative channel estimation and data detection for space-time block codes. In: 2010 International Conference on Advanced Technologies for Communications, ATC 2010, 20 October 2010 through 22 October 2010, Ho Chi Minh City.

Ngoc Doan, T. and Tuan Nguyen, A. and Van Binh, P. and Van Hung, T. and Quoc Tru, V. and Trac Luat, D. (2021) Static analysis of FGM cylindrical shells and the effect of stress concentration using quasi-3D type higher-order shear deformation theory. Composite Structures, 262: 113357. ISSN 2638223

Nguyen, A.-T. and Vo, H.-D. and Dinh, C.-T. and Chu, H.-Q. (2022) AERODYNAMIC PERFORMANCES OF A SINGLE-STAGE TRANSONIC AXIAL COMPRESSOR USING AN INCLINED CASING GROOVE. Australian Journal of Mechanical Engineering. ISSN 14484846

Nguyen, A.T. and Han, J.-H. (2018) Wing flexibility effects on the flight performance of an insect-like flapping-wing micro-air vehicle. Aerospace Science and Technology, 79. pp. 468-481. ISSN 12709638

Nguyen, A.T. and Han, J.-H. (2023) A near-optimal-trim-search method for six-degrees-of-freedom model insects: An application to flight in the lateral-wind condition. Aerospace Science and Technology, 133.

Nguyen, A.T. and Han, J.-H. and Vu, T.T. (2019) The Effects of Wing Mass Asymmetry on Low-Speed Flight Characteristics of an Insect Model. International Journal of Aeronautical and Space Sciences, 20 (4). pp. 940-952. ISSN 2093274X

Nguyen, A.T. and Le, V.D.T. and Tran, T.H. and Duc, V.N. and Phung, V.B. (2020) Study of vertically ascending flight of a hawkmoth model. Acta Mechanica Sinica/Lixue Xuebao, 36 (5). pp. 1031-1045. ISSN 5677718

Nguyen, A.T. and Pham, T.D. and Vu, Q.T. (2019) Flapping flight in the wake of a leading insect. Journal of Mechanical Science and Technology, 33 (7). pp. 3277-3288. ISSN 1738494X

Nguyen, A.T. and Tran, A.V. and Tang, Q.N. and Nguyen, L.H. and Ha, M.D. and Nguyen, T.T. (2021) An integrated simulation approach to study the propulsion mechanism of a biomimetic fishtail. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Nguyen, A.T. and Tran, N.D. and Vu, T.T. and Pham, T.D. and Vu, Q.T. and Han, J.-H. (2019) A Neural-network-based Approach to Study the Energy-optimal Hovering Wing Kinematics of a Bionic Hawkmoth Model. Journal of Bionic Engineering, 16 (5). pp. 904-915. ISSN 16726529

Nguyen, A.V. (2022) Use of Image Processing Technology to Identify the Position of Indoor Robot. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Nguyen, A.V. and Tran, T.H. (2022) Determining Objects Surface and Its Characteristics by Mathematical Approach. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Nguyen, C.X. and Lukianov, A.D. and Pham, T.D. and Nguyen, A.D. (2020) Synthesis of a nonlinear control law with efficiency energy for the self-balancing two wheeled vehicle. In: 2nd International Conference on Energy Efficiency and Energy Saving in Technical Systems, E3STS 2019, 16 June 2020 through 17 June 2020.

Nguyen, C.X. and Pham, T.D. and Lukynov, A.D. and Tran, P.C. and Truong, Q.D. (2021) Design embedded control system based controller of the quasi time optimization approach for a magnetic levitation system. In: 16th International Scientific-Technical Conference on Dynamics of Technical Systems, DTS 2020, 11 September 2020 through 13 September 2020.

Nguyen, C.X. and Phan, H.N. and Lukianov, A.D. and Pham, T.D. and Nguyen, T.T. and Nguyen, H.T. (2019) Design of an embedded control system based on the quasi-time optimal control law when limiting the control signal for the ball and beam system. In: 15th International Scientific-Technical Conference on Dynamics of Technical System, DTS 2019, 11 September 2019 through 13 September 2019.

Nguyen, D.-D. (2021) Cloud-Based Drone Management System in Smart Cities. In: Studies in Systems, Decision and Control. Springer Science and Business Media Deutschland GmbH, pp. 211-230.

Nguyen, D.-D. and Dang, Q.-D. (2024) Development of an Intelligent Drone Management System for Integration into Smart City Transportation Networks. Drones, 8 (9): 512. ISSN 2504446X

Nguyen, D.-D. and Nguyen, H.H. (2022) An investigation of the Internet-based approach for drone management in a city environment. In: Conference of 7th International Scientific Conference on Applying New Technology in Green Buildings, ATiGB 2022, 11 November 2022, Virtual, Online.

Nguyen, D.D. and Duong, M.H. and Nguyen, T.T. and Phan, N.G. and Nguyen, T.D.L. (2024) Microactuators Supporting and Sensor Technology an Intelligent Transportation Management System. In: International Conference on Intelligent Systems and Networks, ICISN 2024, 22 March 2024 Through 23 March 2024, Hanoi.

Nguyen, D.Q. (2021) Kinematics of a 2-DOF Planar Suspended Cable-Driven Parallel Robot. In: Cable-Driven Parallel Robots. CableCon 2021.

Nguyen, L. and Xuan, H.N. and Bui, L.T. (2016) Performance Measurement for Interactive Multi-objective Evolutionary Algorithms. In: 7th IEEE International Conference on Knowledge and Systems Engineering, KSE 2015, 8 October 2015 through 10 October 2015.

Nguyen, L.H. and Firsanov, V.V. (2021) Stress concentration state of piezoelectricity in cylindrical shell based on the non-classical theory. Structural Integrity and Life, 21 (1). pp. 53-58. ISSN 14513749

Nguyen, L.H. and Firsanov, V.V. (2021) Stress state analysis of laminated shells with piezoelectric layers based on the refined theory. In: 19th International Conference on Aviation and Cosmonautics, AviaSpace 2020, 23 November 2020 through 27 November 2020.

Nguyen, T.-B. and Nguyen, T.-D. and Le, M.-T. and Ngo, V.-D. (2017) Efficiency zero-forcing detectors based on group detection for massive MIMO systems. In: 10th International Conference on Advanced Technologies for Communications, ATC 2017, 18 October 2017 through 20 October 2017.

Nguyen, T.-D. and Tran, X.-N. and Do, T.-M. and Ngo, V.-D. and Le, M.-T. (2015) Low-complexity detectors for High-rate Spatial Modulation. In: 2014 7th International Conference on Advanced Technologies for Communications, ATC 2014, 15 October 2014 through 17 October 2014.

Nguyen, T.D. and Tran, X.N. and Ngo, V.D. and Le, M.T. (2016) A spatial modulation scheme with full diversity for four transmit antennas. In: 8th International Conference on Advanced Technologies for Communications, ATC 2015, 14 October 2015 through 16 October 2015.

Nguyen, T.T. and Nguyen, D.D. and Duong, M.H. and Phan, N.G. and Nguyen, T.D.L. (2024) Revolutionizing Urban Transportation with Sensor Technology and Microactuators. In: International Conference on Intelligent Systems and Networks, ICISN 2024, 22 March 2024 Through 23 March 2024, Hanoi.

Nguyen, V.D. and Phung, V.B. (2022) Static bending, free vibration, and buckling analyses of two-layer FGM plates with shear connectors resting on elastic foundations. Alexandria Engineering Journal. ISSN 11100168

Nguyen, X.H. and Bui, L.T. and Tran, C.T. (2019) Clustering method using Pareto Corner Search Evolutionary algorithm for objective reduction in many-objective optimization problems. In: 10th International Symposium on Information and Communication Technology, SoICT 2019, 4 December 2019 through 6 December 2019.

Nguyen, X.H. and Bui, L.T. and Tran, C.T. (2020) Improving many objective optimisation algorithms using objective dimensionality reduction. Evolutionary Intelligence, 13 (3). pp. 365-380. ISSN 18645909

Nguyen, X.H. and Thu Bui, L. and Tran, C.T. (2019) A pareto corner search evolutionary algorithm and principal component analysis for objective dimensionality reduction. In: 11th International Conference on Knowledge and Systems Engineering, KSE 2019, 24 October 2019 through 26 October 2019.

P

Pham, T.D. and Nguyen, A.T. and Le, V.D.T. and Nguyen, T.K. (2022) Trajectory analyses of uncontrolled circular parachutes in random spatial wind fields. Journal of Mechanical Science and Technology. ISSN 1738494X

Phung, V.B. and Tran, N.D. and Nguyen, V.D. and Prokopov, V.S. and Dang, H.M. (2021) Explicit Expressions for Buckling Analysis of Thin-Walled Beams under Combined Loads with Laterally-Fixed Ends and Application to Stability Analysis of Saw Blades. International Journal of Structural Stability and Dynamics, 21 (3): 2150032. ISSN 2194554

Phuong, B.V. and Gavriushin, S.S. and Minh, D.H. and Binh, P.V. and Duc, N.V. (2020) Application of a Novel Model “Requirement – Object – Parameter” for Design Automation of Complex Mechanical System. In: International Symposium on Computer Science, Digital Economy and Intelligent Systems, CSDEIS 2019, 4 October 2019 through 6 October 2019.

Q

Quan, N.D. and Hung, H.H. and Son, L.D. and Van An, T. and Hung, N.T. and Linh, C.V. (2022) CONTROL SYSTEM ARCHITECTURE OF AN INTELLIGENT HUMANOID ROBOT. Vietnam Journal of Science and Technology, 60 (6). pp. 1162-1178.

T

Tan, A.-V.C. and Nguyen, V.-H. and Chu, H.-Q. and Vu, T.-S. and Pham, K.-Q. and Nguyen, A.-T. and Nha, T.-L. (2024) Effect of Bleeding Dual Discharge Port on Aerodynamic Performance of a Single-stage Transonic Axial Compressor. International Journal of Fluid Machinery and Systems, 17 (2). pp. 88-101. ISSN 18829554

Tang, T.D. (2014) Algorithms for collision detection and avoidance for five-axis NC machining: A state of the art review. CAD Computer Aided Design, 51. pp. 1-17. ISSN 104485

Tang, T.D. (2013) A five-axis CNC machine postprocessor based on inverse kinematics transformation. In: 2012 3rd International Conference on Manufacturing Science and Technology, ICMST 2012, 18 August 2012 through 19 August 2012, New Delhi.

Tang, T.D. and Bohez, E.L.J. (2015) A new collision avoidance strategy and its integration with collision detection for five-axis NC machining. International Journal of Advanced Manufacturing Technology, 81 (5/8/20). pp. 1247-1258. ISSN 2683768

Thai, L.M. and Luat, D.T. and Phung, V.B. and Minh, P.V. and Thom, D.V. (2021) Finite element modeling of mechanical behaviors of piezoelectric nanoplates with flexoelectric effects. Archive of Applied Mechanics. ISSN 9391533 (In Press)

The Hung, D. and Trung Duy, T. and Quoc Trinh, D. and Quoc Bao, V.N. (2018) Secrecy performance evaluation of TAS protocol exploiting fountain codes and cooperative jamming under impact of hardware impairments. In: 2nd International Conference on Recent Advances in Signal Processing, Telecommunications and Computing, SIGTELCOM 2018, 29 January 2018 through 31 January 2018.

The Hung, T. and Hijikuro, M. and Anyoji, M. and Uchida, T. and Nakashima, T. and Shimizu, K. (2022) Deflector effect on flow behavior and drag of an Ahmed body under crosswind conditions. Journal of Wind Engineering and Industrial Aerodynamics, 231.

Tien, D.M. and Thom, D.V. and Minh, P.V. and Tho, N.C. and Doan, T.N. and Mai, D.N. (2023) The application of the nonlocal theory and various shear strain theories for bending and free vibration analysis of organic nanoplates. Mechanics Based Design of Structures and Machines. ISSN 15397734

Tran, A.V. and Zhang, X. and Zhu, B. (2019) Effects of Temperature and Residual Stresses on the Output Characteristics of a Piezoresistive Pressure Sensor. IEEE Access, 7: 8653271. pp. 27668-27676. ISSN 21693536

Tran, D.K. and Nguyen, A.T. (2022) The Effect of Ground Surface Geometry on the Wing Lift Coefficient. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Tran, H.T. and Pham, K.V. and Le, A.D. and Dinh, C.-T. (2023) Frequency characteristics of axisymmetric conical boattail models with different slant angles. Physics of Fluids, 35 (9): 095113. ISSN 10706631

Tran, N.D. and Nguyen, T.T. (2021) Thermoelastic response and boundary effect of cross-ply laminated cylindrical shells based on a quasi-3D type higher-order shear deformation theory. International Journal of Pressure Vessels and Piping, 194: 104534. ISSN 3080161

Tran, T.-H. and Nguyen, D.-D. (2022) Management and Regulation of Drone Operation in Urban Environment: A Case Study. Social Sciences, 11 (10). ISSN 20760760

Tran, T.H. (2020) The Effect of Boattail Angles on the Near-Wake Structure of Axisymmetric Afterbody Models at Low-Speed Condition. International Journal of Aerospace Engineering, 2020: 7580174. ISSN 16875966

Tran, T.H. and Chen, L. (2020) Optical-flow algorithm for near-wake analysis of axisymmetric blunt-based body at low-speed conditions. Journal of Fluids Engineering, Transactions of the ASME, 142 (11): 111503. ISSN 982202

Tran, T.H. and Chen, L. (2021) Wall shear-stress extraction by an optical flow algorithm with a sub-grid formulation. Acta Mechanica Sinica/Lixue Xuebao, 37 (1). pp. 65-79. ISSN 5677718

Tran, T.H. and Dao, C.T. and Le, D.A. and Nguyen, T.M. (2022) Numerical Study for Flow Behavior and Drag of Axisymmetric Boattail Models at Different Mach Number. In: AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering, RCTEMME 2021, 10 December 2021 through 12 December 2021, Hanoi.

Tran, T.H. and Dinh, H.Q. and Chu, H.Q. and Duong, V.Q. and Pham, C. and Do, V.M. (2021) Effect of boattail angle on near-wake flow and drag of axisymmetric models: a numerical approach. Journal of Mechanical Science and Technology, 35 (2). pp. 563-573. ISSN 1738494X

Tran, T.H. and Le, D.A. and Nguyen, T.M. and Dao, C.T. and Duong, V.Q. (2022) Comparison of Numerical and Experimental Methods in Determining Boundary Layer of Axisymmetric Model. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Tran, The Hung and Anyoji, Masayuki and Nakashima, Takuji and Shimizu, Keigo and Le, Anh Dinh (2021) Experimental Study of the Skin-Friction Topology Around the Ahmed Body in Cross-Wind Conditions. Journal of Fluids Engineering, 144 (3). ISSN 0098-2202

Tran, V.T. and Korikov, A.M. and Tran, D.K. (2022) Synthesis of an algorithm for automatic control of the quadcopter position using the control force estimation method. In: 17th International Conference on Electronic Devices and Control Systems 2021, EDCS 2021, 17 November 2021 Through 19 November 2021, Virtual, Online.

Trinh, H.X. and Binh, P.V. and Manh, L.D. and Manh, N.V. and Quang, N.V. (2022) Soft Robotics-Fingered Hand Based on Working Principle of Asymmetric Soft Actuator. In: Cognitive Science and Technology. Springer, pp. 83-90.

Trinh, H.X. and Binh, P.V. and Manh, L.D. and Manh, N.V. and Quang, N.V. (2023) Soft Robotics-Fingered Hand Based on Working Principle of Asymmetric Soft Actuator. In: Studies in Computational Intelligence. Springer Science and Business Media Deutschland GmbH, pp. 89-95.

Trinh, V.T. and Nguyen, N.M. and Dang, N.T. and Nguyen, K.A. (2018) An Anthropocentric Approach for Solving the Problem of Optimal Automatic Landing Flare. Russian Aeronautics, 61 (2). pp. 220-229. ISSN 10687998

Tung, P.D. (2018) Mathematical modeling and parametric identification of dynamic properties of mechanical subsystems tool and workpiece in turning process. In: 14th International Scientific-Technical Conference "Dynamic of Technical Systems", DTS 2018, 12 September 2018 through 14 September 2018.

Tung, P.D. and Ahn, N.D. (2018) The effect of parametric excitation on a dynamic system of cutting process. In: 14th International Scientific-Technical Conference "Dynamic of Technical Systems", DTS 2018, 12 September 2018 through 14 September 2018.

V

Van Binh, P. and Duc, N.V. and Prokopov, V.S. and Minh, D.H. (2019) Improved Generalized Procedure for Determining Critical State of a Thin-Walled Beam Under Combined Symmetric Loads. International Journal of Structural Stability and Dynamics, 19 (8): 1950098. ISSN 2194554

Vu, M.D. and My, C.A. and Nguyen, T.N. and Duong, X.B. and Le, C.H. and Gao, J. and Zlatov, N. and Hristov, G. and Nguyen, V.A. and Mahmud, J. and Packianather, M.S. (2023) Prediction of the Welding Process Parameters and the Weld Bead Geometry for Robotic Welding Applications with Adaptive Neuro-Fuzzy Models. In: International Conference on Intelligent Systems and Network, ICISN 2023, 18 March 2023 Through 19 March 2023, Hanoi.

Vu, Minh Duc and Nguyen, The Nguyen and My, Chu Anh (2021) Design and Implementation of a Digital Twin to Control the Industrial Robot Mitsubishi RV-12SD. In: 6th IFToMM Asian Mechanisms and Machine Science Conference, Asian MMS 2021, 15 December 2021through 18 December 2021, Virtual, Online.

Vu, N.A. and Pham, T.D. and Tran, T.T. and Pham, Q.-H. (2023) Third-order isogeometric analysis for vibration characteristics of FGP plates in the thermal environment supported by Kerr foundation. Case Studies in Thermal Engineering, 45. ISSN 2214157X

X

Xuan Hiep, T. and My, C.A. and Van Binh, P. and Hieu, L.C. (2023) Innovative development of a soft robotic gripper: mathematical modeling and grasping capability analysis. Mechanics Based Design of Structures and Machines. ISSN 15397734

Z

Zakovorotny, V.L. and Lapshin, V.P. and Gvindjiliya, V.E. and Ahn, N.D. (2019) The energy efficiency of the process of metal cutting at the expense of the sustainability of the evolutionary trajectory of the cutting. In: 2019 International Conference "Energy Efficiency and Energy Saving in Technical Systems", EEESTS 2019, 19 April 2019 through 20 April 2019.