Browse by Journal

2015

Khuat, V. and Chen, T. and Dao, V. (2015) Fabrication of nanostructures on silicon carbide surface and microgroove sidewall using 800-nm femtosecond laser. Optical Engineering, 54 (7): 77102. ISSN 913286

2016

Nguyen, V.-G. (2016) View-dependent geometric calibration for offset flat-panel cone beam computed tomography systems. Optical Engineering, 55 (4): 43102. ISSN 913286

2017

Le, V. and Kuang, C. and Xu, L. (2017) Optimization of wavefront coding systems based on the use of multitarget optimization. Optical Engineering, 56 (9): 93102. ISSN 913286

2018

Le, V. and Wang, X. and Kuang, C. and Liu, X. (2018) Axial resolution enhancement for light sheet fluorescence microscopy via using the subtraction method. Optical Engineering, 57 (10): 103107. ISSN 913286

Le, V. and Wang, X. and Kuang, C. and Liu, X. (2018) Resolution enhancement of confocal scanning microscopy using low-intensity imaging part of point spread function. Optical Engineering, 57 (5): 53106. ISSN 913286

2019

Phan, N.N. and Le, H.H. and Duong, D.C. and Ta, D.V. (2019) Measurement of nanoscale displacements using a Mirau white-light interference microscope and an inclined flat surface. Optical Engineering, 58 (6): 64106. ISSN 913286

Phan, N.N. and Le, H.H. and Duong, D.C. (2019) Surface curvature measurement of microlenses using a white-light interference microscope and fast geometric fit algorithm. Optical Engineering, 58 (12): 124105. ISSN 913286

2022

Nguyen, Van-Giang (2022) Maximizing regularity for designing geometric calibration phantom in computed tomography. Optical Engineering, 61 (02). ISSN 0091-3286

Le, T.D. and Tran, Q.A. and Do, S.V. and Le, H.H. and Ta, D.V. (2022) Method for determining the wavefront aberration of deformed optical components under external forces. Optical Engineering, 61 (11). ISSN 00913286