Lin, W. and Zhao, S. and Dao, V. and Zhao, C. and Wang, J. (2012) Reasonable processing parameters of squeeze casting semi-solid A356 aluminum alloy connecting rod. Tezhong Zhuzao Ji Youse Hejin/Special Casting and Nonferrous Alloys, 32 (5). pp. 438-442. ISSN 10012249
Full text not available from this repository. (Upload)Abstract
Filling and solidification of squeezing casting semi-solid A356 alloy connecting rod were simulated by establishing flow model with the help of PLCO model (Power Law Cut-Off) in the Procast2008 software. Effects of pouring temperature, punching velocity and preheating temperature of the mould on quality of the connecting rod were investigated to obtain the optimized processing parameters. With pouring at 576~583°C and preheating mould at 200~250°C as well as punching at 0.1~0.5 m/s, the semi-solid A356 slurring is filled smoothly with a short solidification time, and the defects are decreased significantly in the connecting rod.
Item Type: | Article |
---|---|
Divisions: | Faculties > Faculty of Physical and Chemical Engineering |
Additional Information: | Language of original document: Chinese. |
URI: | http://eprints.lqdtu.edu.vn/id/eprint/10122 |