Items where Source is "Journals peer-reviewed by Scopus" and Division is "Faculty of Vehicle and Energy Engineering"

Article

Binh, D.T. and Chebanenko, V.A. and Duong, L.V. and Kirillova, E. and Thang, P.M. and Soloviev, A.N. (2020) Applied theory of bending vibration of the piezoelectric and piezomagnetic bimorph. Journal of Advanced Dielectrics, 10 (3): 2050007. ISSN 2010135X

Chau, M.Q. and Nguyen, X.P. and Huynh, T.T. and Chu, V.D. and Le, T.H. and Nguyen, T.P. and Nguyen, D.T. (2021) Prospects of application of IoT-based advanced technologies in remanufacturing process towards sustainable development and energy-efficient use. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. ISSN 15567036 (In Press)

Cu, P.X. and Bui, A.H. (2019) Methodologies for reliability prediction of electronic component in military vehicles. Advances in Military Technology, 14 (1). pp. 89-98. ISSN 18022308

Dao, Q.M. and Tran, T.D. and Van Le, D. (2024) STUDY ON TERRAIN RESPONSE OF THE MILITARY MOBILE REPAIR VEHICLE TOWING POWER GENERATOR TRAILER BEFORE AND AFTER IMPROVEMENT. EUREKA, Physics and Engineering, 2024 (5). pp. 3-14. ISSN 24614254

Duong, C.Q. and Pham, P.X. and Luong, T.D. (2023) Experimental and Theoretical Investigations of a Plate-Fin Water Intercooler Equipped in a Boosted Diesel Engine. Journal of Heat Transfer, 145 (2). ISSN 00221481

Duong, L.V. and Pham, M.T. and Chebanenko, V.A. and Solovyev, A.N. and Nguyen, C.V. (2017) Finite element modeling and experimental studies of stack-type piezoelectric energy harvester. International Journal of Applied Mechanics, 9 (6): 1750084. ISSN 17588251

Duong, Le Van and Tuan, Le Anh (2022) Modeling and observer-based robust controllers for telescopic truck cranes. Mechanism and Machine Theory, 173. p. 104869. ISSN 0094114X

Ha, H.N. and Quoc, Q.N. and Xuan, P.C. (2022) Early-Stage Analysis of Air Independent Propulsion Based on Fuel Cells for Small Submarines. Advances in Military Technology, 17 (2). pp. 457-469.

He, M. and Luo, W.-Z. and Trinh, V.-H. and Lei, L. and Xia, L. and Li, D. (2024) Design of Fresnel acoustic reflector for sub-wavelength broadband sound diffusion. Materials and Design, 238. ISSN 02641275

Hoang, V.N. and Thi, L.D. (2015) Experimental study of the ignition delay of diesel/biodiesel blends using a shock tube. Biosystems Engineering, 134. pp. 1-7. ISSN 15375110

Langlois, V. and Trinh, V.H. and Lusso, C. and Perrot, C. and Chateau, X. and Khidas, Y. and Pitois, O. (2018) Permeability of solid foam: Effect of pore connections. Physical Review E, 97 (5): 53111. ISSN 24700045

Langlois, V. and Trinh, V.H. and Perrot, C. (2019) Electrical conductivity and tortuosity of solid foam: Effect of pore connections. Physical Review E, 100 (1): 13115. ISSN 24700045

Luong, D.T. and Vu, V.P. (2024) A comparative study on the effect of nano-additives on the performance and emissions of a diesel engine run on palm biodiesel. Nanotechnology for Environmental Engineering, 9 (3). pp. 519-523. ISSN 23656379

Marzbani, H. and Khayyam, H. and To, C.N. and Quoc, D.V. and Jazar, R.N. (2019) Autonomous Vehicles: Autodriver Algorithm and Vehicle Dynamics. IEEE Transactions on Vehicular Technology, 68 (4): 8626459. pp. 3201-3211. ISSN 189545

My, C.A. and Makhanov, S.S. and Van, N.A. and Duc, V.M. (2020) Modeling and computation of real-time applied torques and non-holonomic constraint forces/moment, and optimal design of wheels for an autonomous security robot tracking a moving target. Mathematics and Computers in Simulation, 170. pp. 300-315. ISSN 3784754

Nguyen, D.D. and Chu, D.V. and Van, S.L. (2023) Influence of Operating Factors on Accurate Digging Depth Control of the Remote-Controlled Explosive Disposal Machine. Journal of Mechanical Engineering, 20 (3). pp. 371-386. ISSN 18235514

Nguyen, D.D. and van Chu, D. and van Sy, L. (2021) Dynamic analysis and simulation of the hydraulic control system on the remote-controlled explosive ordnance disposal machine. International Journal of Manufacturing, Materials, and Mechanical Engineering, 11 (3). pp. 37-54. ISSN 21561680

Nguyen, D.X. and Andrea, C. and Nguyen, K.T. and Nguyen, V.H. and Postrioti, L. and Pham, P.X. (2023) Shot-to-Shot Deviation of a Common Rail Injection System Operating with Cooking-Oil-Residue Biodiesel. SAE International Journal of Engines, 16 (8). ISSN 19463936

Nguyen, H.H. and Čorňák, Š. (2020) The effect of biodiesel on combustion, performance and emission characteristics of Di diesel engine. Advances in Military Technology, 15 (2). pp. 221-230. ISSN 18022308

Nguyen, H.T.T. and Truong, T.H. and Nguyen, T.D. and Dang, V.T. and Vu, T.V. and Nguyen, S.T. and Cu, X.P. and Nguyen, T.T.O. (2020) Ni-doped WO3 flakes-based sensor for fast and selective detection of H2S. Journal of Materials Science: Materials in Electronics, 31 (15). pp. 12783-12795. ISSN 9574522

Nguyen, Q.D. and Milani, S. and Vo, D.Q. and Marzbania, H. and Jazar, R.N. (2021) Vibration Analysis of the Bicycle-Car Model Considering Tire-Road Separation. SAE International Journal of Commercial Vehicles, 15 (2). ISSN 1946391X

Nguyen, V.H. and Duong, M.Q. and Nguyen, K.T. and Pham, T.V. and Pham, P.X. (2020) An extensive analysis of biodiesel blend combustion characteristics under a wide-range of thermal conditions of a cooperative fuel research engine. Sustainability (Switzerland), 12 (18): 7666. ISSN 20711050

Nguyen, V.H. and Pham, P.X. (2015) Biodiesels: Oxidizing enhancers to improve CI engine performance and emission quality. Fuel, 154. pp. 293-300. ISSN 162361

Nguyen, Van Thang and Danlos, Amélie and Ravelet, Florent and Deligant, Michael and Solis, Moises and Khelladi, Sofiane and Bakir, Farid (2021) Numerical Analysis of a Novel Twin-Impeller Centrifugal Compressor. Computation, 9 (12). p. 143. ISSN 2079-3197

Nguyen, Vu H. and Cavicchi, Andrea and Nguyen, Dat X. and Nguyen, Kien T. and Pham, Phuong X. and Postrioti, Lucio (2022) Hydraulic characterization of a second-generation common rail injector operating under solo and split injection strategies. Flow Measurement and Instrumentation, 85. p. 102170. ISSN 09555986

Pham, P.X. and Nguyen, K.T. and Pham, T.V. and Nguyen, V.H. (2020) Biodiesels manufactured from different feedstock: From fuel properties to fuel atomization and evaporation. ACS Omega, 5 (33). pp. 20842-20853. ISSN 24701343

Pham, P.X. and Nguyen, V.H. (2017) Residue-Based Biodiesel: Experimental Investigation into Engine Combustion and Emission Formation. Journal of Energy Engineering, 143 (5): 4017047. ISSN 7339402

Pham, P.X. and Pham, N.V.T. and Pham, T.V. and Nguyen, V.H. and Nguyen, K.T. (2021) Ignition delays of biodiesel-diesel blends: Investigations into the role of physical and chemical processes. Fuel, 303: 121251. ISSN 162361

Singh, G. and Pham, P.X. and Kourmatzis, A. and Masri, A.R. (2019) Effect of electric charge and temperature on the near-field atomization of diesel and biodiesel. Fuel, 241. pp. 941-953. ISSN 162361

Solovyev, A.N. and Duong, L.V. (2016) Optimization for the Harvesting Structure of the Piezoelectric Bimorph Energy Harvesters Circular Plate by Reduced Order Finite Element Analysis. International Journal of Applied Mechanics, 8 (3): 1650029. ISSN 17588251

To, Q.-D. and Nguyen, M.-T. and Bonnet, G. and Monchiet, V. and To, V.-T. (2017) Overall elastic properties of composites from optimal strong contrast expansion. International Journal of Solids and Structures, 120. pp. 245-256. ISSN 207683

To, V.-T. and To, Q.-D. and Bonnet, G. and Le, B.-A. and Nguyen, T.-T. (2020) Effective permeability of anisotropic porous materials containing periodically or randomly distributed cracks. European Journal of Mechanics, A/Solids, 80: 103902. ISSN 9977538

Trinh, V.-H. and Nguyen, T.-V. and Nguyen, T.-H.-N. and Nguyen, M.-T. (2022) Design of Sound Absorbers Based on Open-Cell Foams via Microstructure-Based Modeling. Archives of Acoustics, 47 (4). pp. 501-512.

Trinh, V.H. and Guilleminot, J. and Perrot, C. (2018) On the construction of multiscale surrogates for design optimization of acoustical materials. Acta Acustica united with Acustica, 104 (1). pp. 1-4. ISSN 16101928

Trinh, V.H. and Guilleminot, J. and Perrot, C. (2021) On the sensitivity of the design of composite sound absorbing structures. Materials and Design, 210: 110058. ISSN 2641275

Trinh, V.H. and Langlois, V. and Guilleminot, J. and Perrot, C. and Khidas, Y. and Pitois, O. (2019) Tuning membrane content of sound absorbing cellular foams: Fabrication, experimental evidence and multiscale numerical simulations. Materials and Design, 162. pp. 345-361. ISSN 2641275

Trinh, V.H. and Li, D. and He, M. and Li, X. (2022) Modeling Sound Absorption of Graded Foam Absorbers via Polynomial Surrogate Technique. Journal of Theoretical and Computational Acoustics. ISSN 25917285

Trinh, Van Hai and Guilleminot, Johann and Perrot, Camille and Vu, Viet Dung (2022) Learning acoustic responses from experiments: A multiscale-informed transfer learning approach. The Journal of the Acoustical Society of America, 151 (4). pp. 2587-2601. ISSN 0001-4966

Tuan, Le Anh and Duong, Le Van (2022) Neural fractional-order control of telescopic truck cranes. Applied Mathematical Modelling, 108. pp. 807-824. ISSN 0307904X

Vo, D.Q. and Marzbani, H. and Fard, M. and Jazar, R.N. (2018) Variable caster steering in vehicle dynamics. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232 (9). pp. 1270-1284. ISSN 9544070

Vu, M.N. and Nguyen, S.T. and Vu, M.H. and Tang, A.M. and To, V.T. (2015) Heat conduction and thermal conductivity of 3D cracked media. International Journal of Heat and Mass Transfer, 89. pp. 1119-1126. ISSN 179310

Vu, N.-T. and Phan, L.-D. and Nguyen, V.-D. and Vu, Q.-B. (2021) Research of Determining Low-Reliability Elements of Multiple-Flows Compressed Air Braking System Based on Goal-Oriented (GO) Methodology. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8814-8824. ISSN 22298649

Vu, V.T. and Vu, N.T. (2023) Effect of Suspension Roll Angle Sensors on the Performance of H ∞Active Antiroll Bar Control System of Trucks. Mathematical Problems in Engineering, 2023. ISSN 1024123X

Book Section

Nguyen, D.Q. and Milani, S. and Marzbani, H. and Jazar, R.N. (2022) Vehicle vibration analysis of the quarter-car model considering tire-road separation. In: Nonlinear Approaches in Engineering Application: Design Engineering Problems. Springer International Publishing, pp. 429-465. ISBN 9783030827199; 9783030827182

Nguyen, T.M. and Vu, L.D. and Nguyen, Q.T. (2020) Evaluation Motion Comfort of Sleeper Coach, the Type of Vehicle Is Manufactured and Assembled at Vietnam, Effect of Random Road Profile Based on Standard ISO 8608. In: Lecture Notes in Networks and Systems. Springer, pp. 303-309.

Pham, N.V.T. and Nguyen, K.T. and Pham, T.V. and Pham, P.X. (2021) Experimental and Numerical Investigations into Evaporation Rates of Some Fuels Utilized in Aviation Gas Turbine Engines. In: Lecture Notes in Networks and Systems. Springer Science and Business Media Deutschland GmbH, pp. 434-440.

Pham, P.X. and Pham, N.V.T. and Vu, L.D. and Nguyen, K.T. and Pham, T.V. and Nguyen, V.H. and Luong, T.D. and Nguyen, M.Q. (2020) Development of a Backlight Imaging System to Investigate Liquid Breakup in Near-Field Swirl Atomizer. In: Lecture Notes in Networks and Systems. Springer, pp. 262-267.

Soloviev, A.N. and Parinov, I.A. and Duong, L.V. and Yang, C.C. and Chang, S.H. and Lee, J.C.Y. (2013) Analysis of finite element models for piezoelectric devices of energy harvesting. In: Physics and Mechanics of New Materials and Their Applications. Nova Science Publishers, Inc., pp. 335-351. ISBN 9781626185357

Tan, V.V. and Dai, V.Q. and Sename, O. and Jazar, R.N. (2022) Oil leakage analysis for an active anti-roll bar system of heavy vehicles. In: Nonlinear Approaches in Engineering Application: Design Engineering Problems. Springer International Publishing, pp. 553-591. ISBN 9783030827199; 9783030827182

Trinh, V.H. (2020) Microstructure and Permeability of Anisotropic Open-Cell Foams. In: Lecture Notes in Networks and Systems. Springer, pp. 471-476.

Vo, D.Q. and Le, N.K. and Marzbani, H. and Jazar, R.N. (2019) Homogeneous transformation and kinematics of a steering tyre. In: Lecture Notes in Networks and Systems. Springer, pp. 340-349.

Vo, D.Q. and Vu, V.T. and Marzbani, H. and Fard, M. and Jazar, R.N. (2022) Influence of lateral asymmetry on car's lateral dynamics. In: Nonlinear Approaches in Engineering Application: Design Engineering Problems. Springer International Publishing, pp. 489-502. ISBN 9783030827199; 9783030827182

Conference or Workshop Item

Cu, X.P. and Vintr, Z. (2021) Reliability Prediction ofElectronic Devices for Combat Vehicles Based on Accelerated Testing. In: 31st European Safety and Reliability Conference, ESREL 2021, 19 September 2021 Through 23 September 2021, Angers.

Cu, X.P. and Vintr, Z. and Le, T.D. and La, Q.T. (2023) Determination of the Lifetime of Track with Metal - Rubber Joint in Tracked Vehicles under the Action of Tensible Force. In: 9th International Conference on Military Technologies, ICMT 2023, 23 May 2023 Through 26 May 2023, Brno.

Cu, X.P. and Vintr, Z. and Mai, D.S. (2021) Prediction of the Lifetime of Tank Track Components Using the Accelerated Testing. In: 8th International Conference on Military Technologies, ICMT 2021, 8 June 2021 through 11 June 2021.

Dinh Thi, L. and Nguyen Hoang, V. and Huang, Z. (2013) To study on ignition characteristics of syngas mixtures by shock tube. In: 17th Asia Pacific Automotive Engineering Conference, APAC 2013, 1 April 2013 through 3 April 2013, Bangkok.

Duong, M.Q. and Nguyen, V.H. and Pham, P.X. (2019) Development of Empirical Correlations for Ignition Delay in a Single Cylinder Engine Fueled with Diesel/Biodiesel Blends. In: 2019 International Conference on System Science and Engineering, ICSSE 2019, 20 July 2019 through 21 July 2019.

Duy, D.N. and Van, D.C. and Van, S.L. (2021) Modelling and simulation of the hydraulic system on eodm machine. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Ha Hiep, N. and Cong Doan, N. and Quoc Quan, N. and Van Duong, N. (2023) Structural Modifications of the Inner Surface of Cylinder Liners for Decreasing Mechanical Losses in High-Speed Diesel Engines. In: SAE Automotive Technical Papers, WONLYAUTO 2023, 1 January 2023, Warrendale.

Ha Hiep, N. and Quoc Quan, N. and Hong Thai, G. and Thi San, P. (2023) Numerical Modeling and Experimental Validation of a Hydrogen/Oxygen Fuel Cell for Underwater Vehicle Applications. In: SAE Automotive Technical Papers, WONLYAUTO 2023, 1 January 2023, Warrendale.

Hiep, N.H. and Quan, N.Q. (2022) Experimental Study on the Performance and Emission Characteristics of a Diesel Engine on an Actual Ship Using Diesel Fuel and Water-Diesel Emulsion. In: Conference of SAE Automotive Technical Papers, WONLYAUTO 2022, 1 January 2022, Warrendale.

Manh, V.D. and Le, D.T. and Nguyen, Q.Q. and Pham, P.X. and Nguyen, K.T. (2023) Estimating the Heat Transfer Coefficient for a Jet Impingement Tube with the Initial Cross Flow. In: SAE Automotive Technical Papers, WONLYAUTO 2023, 1 January 2023, Warrendale.

Nguyen, D.-D. and Nguyen, H.H. (2022) An investigation of the Internet-based approach for drone management in a city environment. In: Conference of 7th International Scientific Conference on Applying New Technology in Green Buildings, ATiGB 2022, 11 November 2022, Virtual, Online.

Nguyen, H.P. and Hoang, A.T. and Nizetic, S. and Nguyen, X.P. and Le, A.T. and Luong, C.N. and Chu, V.D. and Pham, V.V. (2020) The electric propulsion system as a green solution for management strategy of CO2 emission in ocean shipping: A comprehensive review. In: UNSPECIFIED. (In Press)

Nguyen, M.-N. and Nguyen, P.-L. and Nguyen, K.-K. and Vu, V.-D. and Trinh, V.-H. (2023) Development of composite panels based on porous glass aerogels for acoustic applications. In: 12th International Scientific and Practical Forum on Environmentally Sustainable Cities and Settlements: Problems and Solutions, ESCP 2023, 20 April 2023 Through 21 April 2023, Hanoi Capital.

Nguyen, V.-T. and Danlos, A. and Paridaens, R. and Ravelet, F. and Deligant, M. and Khelladi, S. and Bakir, F. (2021) Experimental study of a centrifugal compressor with two successive and counter-rotating impellers. In: UNSPECIFIED.

Pham Vu, T.N. and Pham Xuan, P. and Nguyen Trung, K. (2023) Model Selection for Predicting the Evaporation Rate of Aviation Fuels. In: Conference of SAE Automotive Technical Papers, WONLYAUTO 2023, 1 January 2023, Warrendale.

Soloviev, A.N. and Oganesyan, P.A. and Skaliukh, A.S. and Duong, L.V. and Gupta, V.K. and Panfilov, I.A. (2017) Comparison between applied theory and final element method for energy harvesting non-homogeneous piezoelements modeling. In: International Conference on Physics, Mechanics of New Materials and Their Applications, PHENMA 2016, 19 July 2016 through 22 July 2016.

Thi, L.D. and Zhang, Y. and Huang, Z. (2014) Shock tube study on ignition delay of multi-component syngas mixtures - Effect of equivalence ratio. In: UNSPECIFIED.

To, C.N. and Hormoz and Quoc, C.D.V. and Simic, M. and Khayyam, H. and Marzbani and Jazar, R.N. (2018) Autodriver Autonomous Vehicles Control Strategy. In: 22nd International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2018, 3 September 2018 through 5 September 2018.

Tran, C.V. and Furch, J. and Cu, X.P. (2020) Simulation of vibration propagated by rolling element bearings in mechanical gearbox. In: Proceedings of the 2nd International Scientific Conference Challenges to National Defence in Contemporary Geopolitical Situation, CNDCGS 2020, 14 October 2020 through 16 October 2020.

Tran, T.D. and Hnidka, J. and Van, D.C. (2019) The dynamic of working equipment of the remotely controlled bomb disposal machine. In: 7th International Conference on Military Technologies, ICMT 2019, 30 May 2019 through 31 May 2019.

Trinh, V.H. and Hoang, M.T. and Perrot, C. and Langlois, V. and Khidas, Y. and Pitois, O. (2017) A Systematic Link between Microstructure and Acoustic Properties of Foams: A Detailed Study on the Effect of Membranes. In: 6th Biot Conference on Poromechanics, Poromechanics 2017, 9 July 2017 through 13 July 2017.

Trinh, Van-Hai and Nguyen, Viet-Tan and Pham, Khac-Quang (2021) Global Sensitivity Analysis for Bridge Crane System by Surrogate Modeling. In: 6th International Conference on Geotechnics, Civil Engineering and Structures, CIGOS 2021, 28 October 2021 through 29 October 2021, Ha Long Bay.

Van, N.K. and Anh, T.T. and Hoang, V.N. and Cao, V.N. (2017) Combustion modeling of a Common Rail multi-injection diesel engine fueled with diesel and biodiesel. In: 2017 International Conference on System Science and Engineering, ICSSE 2017, 21 July 2017 through 23 July 2017.

Vintr, Z. and Cu, X.P. and Tran, C.V. (2020) Evaluation of electronic components degradation using the accelerated reliability testing data. In: 30th European Safety and Reliability Conference, ESREL 2020 and 15th Probabilistic Safety Assessment and Management Conference, PSAM15 2020, 1 November 2020 through 5 November 2020.

Vintr, Z. and Cu, X.P. and Tran, C.V. (2020) Evaluation of electronic components degradation using the accelerated reliability testing data. In: 30th European Safety and Reliability Conference, ESREL 2020 and 15th Probabilistic Safety Assessment and Management Conference, PSAM 2020, 1 November 2020 through 5 November 2020.

Vu, M.D. and Nguyen, K.T. and Dao, T.T. (2019) The Effect of Cooling-Air Flow Conditions on the Thermal State of High-Pressure Nozzle Blade. In: 2019 International Conference on System Science and Engineering, ICSSE 2019, 20 July 2019 through 21 July 2019.