Browse by Journal

Chu, H.-Q. and Nguyen, Q.-H. and Nguyen, Q.-H. and Nguyen, Q.-V. and Nguyen, V.-H. and Hoang, K.-D.T. and Le, X.-T. and Dinh, C.-T. and Tran, T.-T. (2022) Aerodynamic Performance of a Multi-stage Axial Compressor with Tip Clearance Coupled with Hub Fillet. In: AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering, RCTEMME 2021, 10 December 2021 through 12 December 2021, Hanoi.

Duong, V.Q. and Nguyen, L.H. and Tran, N.D. and Doan, T.L. and Tran, T.H. (2022) Bending Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Cylindrical Shell Using Higher-Order Shear Deformation Theory. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Le, V.T. and Nguyen, H.Q. (2022) Comparison of Influence of Main Process Parameters on Surface Roughness of Heated Treatment and Non-heated Treatment SKD61 Steels Processed by PMEDM Process. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Tran, T.H. and Le, D.A. and Nguyen, T.M. and Dao, C.T. and Duong, V.Q. (2022) Comparison of Numerical and Experimental Methods in Determining Boundary Layer of Axisymmetric Model. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Duong, X.B. and Chu, A.M. and Le, C.H. and Nguyen, T.A. and Vu, M.D. and Le, A. (2021) Comparison of the efficiency of numerical algorithms for solving the inverse kinematics problem of redundant serial-link robots. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Van Tuan, P. and Bien, D.X. and Hoang, P.Q. and Lap, D.T. and Binh, L.T. (2023) Cutting Methods in the Single Point Diamond Turning and Surface Roughness of the Ultra-Precision Products—A Brief Review. In: 3rd International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Nguyen, A.V. and Tran, T.H. (2022) Determining Objects Surface and Its Characteristics by Mathematical Approach. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Tran, H.S. and Nguyen, D.C. and Le, T.P. and Van Nguyen, C. (2022) Development of Automatic Landing Control Algorithm for Fixed-Wing UAVs in Longitudinal Channel in Windy Conditions. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Chung, N.T. and Thu, D.T.N. and Van Dang, N. (2022) Dynamic Analysis of Curved Beam on Elastic Foundation Subjected to Moving Oscillator Using Finite Element Method. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Tran, D.K. and Nguyen, A.T. (2022) The Effect of Ground Surface Geometry on the Wing Lift Coefficient. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Hieu, N.T. and Thai, L.M. and Dung, N.T. and Van Thom, D. and Van Minh, P. (2023) Effect of Hot-Pressing Mold Design on Uniformity of Dome-Shaped Products from Infrared Optical Ceramics. In: 3rd International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Pham, G.-D. and Nguyen, C.-T. and Le, X.-T. and Duong, V.-D. and Chu, H.-Q. and Nguyen, T.-K. and Dinh, C.-T. (2024) Effects of Axisymmetric Rotor Injection on the Aerodynamic Performances of a Single-Stage Transonic Axial Compressor. Lecture Notes in Mechanical Engineering. pp. 563-570. ISSN 21954356

Quy, V.B. and Van, D.N. and Tu, H.T. (2024) The Energy Efficiency of the Shot in a Gas-Operated Gun. Lecture Notes in Mechanical Engineering. pp. 579-586. ISSN 21954356

Le, V.T. and Huu, M.N. and Ha, Q.T. and Nguyen, V.A. (2024) Environmental Performance Comparison Between Wire-Arc and Powder-Laser-Based DED Processes. Lecture Notes in Mechanical Engineering. pp. 353-360. ISSN 21954356

Le, V.T. and Banh, T.L. (2021) Evaluation of the influence of electrical parameters and powder concentration to the content of tungsten on the surface of skd61 steel in edm process. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Van Dung, N. and Thai, L.M. and Dung, N.T. and Van Minh, P. (2023) Free Vibration Response of Micro FG Beams Taking the Initial Geometrical Imperfection into Consideration. In: 3rd International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Pham, Q.H. and Duong, X.B. and Phan, H.C. and Dinh, D.M. and Nguyen, V.D. and Nguyen, V.N. and Pham, V.T. (2021) Kinematics and dynamics analysis of geostationary satellite antenna system. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Le, V.T. and Banh, T.L. and Ha, X.D. and Vu, T.S. and Nguyen, T.H. and Do, M.T. and Le, T.B. (2024) The Material Removal Rate of AISI H13 Tool Steel in the Roughing EDM Process with Mixing Powder: Influence Analysis and Optimization of Major Process Parameters. Lecture Notes in Mechanical Engineering. pp. 37-44.

Duy, D.N. and Van, D.C. and Van, S.L. (2021) Modelling and simulation of the hydraulic system on eodm machine. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Nguyen, N. and My, C.A. and Le, C.H. and Zlatov, N. and Hristov, G. and Gao, J. and Nguyen, H.Q. and Mahmud, J. and Bui, T.T. and Packianather, M.S. (2024) Motion and Condition Monitoring of an Industrial Robot Based on Digital Twins. In: 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Le, V.D.T. and Nguyen, A.T. and Dang, N.T. and Phung, B.V. (2022) A Multibody Dynamics Approach to Study an Insect-Wing Structure. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Nguyen, A.T. and Lai, D.G. and Dao, V.L. (2022) Muti Object Prediction and Optimization Process Parameters in Cooling Slope Using Taguchi-Grey Relational Analysis. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Tran, T.H. and Dao, C.T. and Le, D.A. and Nguyen, T.M. (2022) Numerical Study for Flow Behavior and Drag of Axisymmetric Boattail Models at Different Mach Number. In: AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering, RCTEMME 2021, 10 December 2021 through 12 December 2021, Hanoi.

Thai, L.M. and Hieu, N.T. and Dung, N.T. and Tam, T.D. and Van Minh, P. (2023) On the Free Vibration Analysis of Micro FG Beams Considering the Initial Geometrical Imperfection. In: 3rd International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Pham, V.H. and Nguyen, T.D. and Le, V.T. and Tien, D.H. and Nguyen, V.-C. (2022) Optimization of Cutting Parameters in MQL Flat Surface Milling of SKD11 Steel. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Nguyen, N.-M. and Do, K.-D.C. and Dinh, C.T. and Pham, G.-D. and Tran, T.-T. and Vu, D.-M. and Nguyen, T.-T. and Le, D.-A. and Nguyen, A.T. (2024) Parametric Studies of Fan-Shaped Pin-Fins on Heat Transfer Characteristics in a Rectangular Channel—Part II. Lecture Notes in Mechanical Engineering. pp. 287-295. ISSN 21954356

Phan, H.C. and Bui, N.D. and Pham, T.D. and Duong, H.T. (2022) Predicting Capacity of Defected Pipe Under Bending Moment with Data-Driven Model. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

My, C.A. and Le, C.H. and Duong, X.B. and Bohez, E.L.J. and Vu, M.D. and Nguyen, T.A. and Nguyen, V.C. and Parkianather, M. and Hoang, C.D. (2021) Real time inverse kinematics of five-axis cnc centers. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Van, N.K. and Le Anh, V. and Van, T.T. and Anh, T.T. and Hoang, V.N. (2022) Real-Time Modeling of a Biodiesel B20 Fuelled CRDI Engine. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Dinh, H.T. and Pham, V.T. and Pham, Q.H. (2024) Spiral Bevel Gear Manufacturing Technology: A Review. In: 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Phuc, T.D. and Phuc, P.H. and Trung, N.T. and Dung, H.T. and Kien, H.T. (2023) Study Effects of Cutting Parameters on Surface Quality in High Speed Milling of CuZn40Pb1 Brass Alloy. In: 3rd International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2022, 10 November 2022 Through 13 November 2022, Can Tho.

Le, V.T. and Le, V.T. (2021) Study and evaluation the influence of rotary tool on surface roughness of skd61 steel in edm process. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020, Nha Trang.

Ha, S.T. and Nguyen, T.D. and Vu, V.C. and Nguyen, M.H. and Nguyen, M.D. (2022) A Study of Fluid-Structure Interaction of Unsteady Flow in the Blood Vessel Using Finite Element Method. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Vu, D.Q. and Nguyen, D.T. and Chu, V.H. and Nguyen, H.T. and Nguyen, A.T. and Nguyen, Q.H. (2024) Study on the Effect of Internal Pressure and Axial Feed in Tube Hydrostatic Forming Process of T-shaped Joints. Lecture Notes in Mechanical Engineering. pp. 379-391. ISSN 21954356

Van Van, L. and Kien, H.T. and Tung, V.T. and Anh, B.T. and Dong, N.T. and Thang, V.T. (2024) Surface Polishing Mechanism for Mechanical Parts Using Pulsed Fiber Laser. Lecture Notes in Mechanical Engineering. pp. 19-25.

Dinh, H.T. and Pham, V.T. and Pham, Q.H. (2024) A Technological Solution to Reduce Tooth Pitch Errors of Spiral Bevel Gears Machined on CNC Generating Machine Klingelnberg C27. Lecture Notes in Mechanical Engineering. pp. 195-202. ISSN 21954356

Bui, M.C. and Le, V.T. and Ta, D.X. and Mai, D.S. and Dinh, D.M. and Doan, T.K. and Tran, V.C. (2022) Thermal Analysis in Wire Arc Additively Manufactured SS308L Walls via Numerical Simulations. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Doan, T.N. and Hung, T.V. and Quang, D.V. (2022) Thermal Bending Analysis of FGM Cylindrical Shells Using a Quasi-3D Type Higher-Order Shear Deformation Theory. In: International Conference on Modern Mechanics and Applications, ICOMMA 2020, 2 December 2020 through 4 December 2020.

Bui, V.Q. and Nguyen, D.V. and Truong, H.T. (2024) The Thermo-Gas-Dynamic Model in the Gas Chamber of a Gas-Operated Gun. Lecture Notes in Mechanical Engineering. pp. 571-577. ISSN 21954356

Le, V.T. and Banh, T.L. and Do, T.L. and Nguyen, T.H. (2022) Tool Rotary Assisted EDM Processing of SKD61 Steel: Influence and Optimizing of Main Process Parameters and Surface Roughness. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Nguyen, A.V. (2022) Use of Image Processing Technology to Identify the Position of Indoor Robot. In: International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development, AMAS 2021, 4 November 2021 Through 7 November 2021, Ha Long.

Vu, M.D. and My, C.A. and Nguyen, T.N. and Le, A. and Ta, M.T. and Duong, X.B. and Nguyen, T.A. and Le, C.H. and Chu, D.H. (2021) A conceptual digital twin for cost-effective development of a welding robotic system for smart manufacturing. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020, Nha Trang.

My, C.A. and Le, C.H. and Duong, X.B. and Bohez, E.L.J. and Vu, M.D. and Nguyen, T.A. and Nguyen, V.C. and Parkianather, M. (2021) A generalization approach for the kinematic modelling of the rotational axes of five-axis cnc centers. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Nguyen, A.T. and Tran, A.V. and Tang, Q.N. and Nguyen, L.H. and Ha, M.D. and Nguyen, T.T. (2021) An integrated simulation approach to study the propulsion mechanism of a biomimetic fishtail. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020.

Le, V.T. and Le, V.T. (2021) An investigation on the impact of the interpass-cooling time on the metallurgy of wire-arc-additive-manufacturing ss308l components. In: 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development, MMMS 2020, 12 November 2020 through 15 November 2020, Nha Trang.